drill pipe elevator, RG drill pipe elevator, GG drill pipe elevator, MGG drill pipe elevator, RA drill pipe elevator, DD drill pipe elevator, CD drill pipe elevator, CDZ drill pipe elevator, LLD drill pipe elevator, side door drill pipe elevator, center latch drill pipe elevator, CL drill pipe elevator, CLS drill pipe elevator, TE drill pipe elevator, Элеватор трубный, Элеватор трубный , двухштропный/Элеватор КМ НП18, Элеваторы для труб

casing elevator, center latch casing elevator, SLX casing elevator, CD casing elevator, DD casing elevator, TA casing elevator, TMA casing elevator, RGA casing elevator, GGA casing elevator, GA casing elevator, SD casing elevator, collar type casing elevator, Элеватор корпусной типа КМ, Элеватор корпусной, Элеватор литой для обсадных труб ЭК

drill collar elevator, TA drill collar elevator, CD drill collar elevator, SLX drill collar elevator, Элеватор литой для обсадных труб ЭК

slip type elevators, MYT slip type elevator, YT slip type elevator, HYT slip type elevator, YC slip type elevator, MYC slip type elevator, HYC slip type elevator, HYC AO slip type elevator, XYC slip type elevator, Элеватор НКТ с вкладышами, Элеватор типа ЭТАД

Plug Valve, DR plug valve, ULT plug valve, TE plug valve, compact plug valve, LTPL plug valve, LT plug valve, top entry plug valve, bottom entry plug valve, Кран пробковый, Кран пробковый проходной сальниковый с паровым обогревом, Кран пробковый 3КМ

rotary slips, SDS rotary slips, SDML rotary slips, SDXL rotary slips, safety clamps, safety clamps model T, safety clamps model C, safety clamps model MP, WA safety clamps, safety clamps for drill collar, машинный ключ, Ключ УМК, Спайдер СПГ, Предохранительный хомут, предохранительные хомуты

tubing elevator, TA tubing elevator, BDA tubing elevator, CD tubing elevator, DD tubing elevator, RA tubing elevator, BD tubing elevator, Элеваторы двухштропные ВМ ЭХЛ (BD型), Элеватор двухштропный Халатяна для НКТ ЭХЛ, Элеватор трубный ЭТ

elevator links, TDS elevator links, weldless links, weldless elevator links, forged elevator links for top drive system, TDS weldless links, perfection links, SH perfection links, Drill collar lift adaptor, DC lift adaptor, DC lift dolly, Штропы для лодвески элеваторов, Штроп бурильный, Элеватор при помощи штропов

swivel joints, TSI swivel joints, long radius swivel joints, long sweep swivel joints, triplestep swivel joints, short radius swivel joints, short sweep swivel joints, pup joints, NPS pup joints, integral pup joints, integral pup joints with retention shoulder, seamless pup joints,Колено шарнирное 3КШ, Быстросборное Соединение (с барашковой гайкой) БСС, БРС, Быстроразъемное Соединение БРС-2, Соединение Быстросборное сб, Трубы Высокого Давления Твд

 

Send us emailTaixing Petroleum Machinery Co., Ltd.

中文

Reliable supplier for drill pipe elevator, casing elevator, drill collar elevator, tubing elevator, single joint elevator, slip type elevator, rotary slips, casing slips, drill collar slips, safety clamps, elevator links, perfection links, DC lift adaptor, manual tong, tubing spider, hose loops, put joint, swivel joints, plug valve and check valve, all major product lines that meet API Specifications and China domestic standards

   

 About Us

 API Certificates   

     Quality Control

 Chinese

 

single joint elevator, DDF single joint elevator, SJL single joint elevator, SPL single joint elevator

manual tong, manual tongs model B, manual tongs model DB, manual tongs model SDD, manual tongs model C, manual tongs model LF, manual tongs for workover operation, manual tongs model HT, машинный ключ, Ключ УМК

 

Drill pipe elevator 

Casing elevator

Drill collar elevator

Slip type elevator

Tubing elevator

Sucker rod elevator

Single joint elevator

Elevator links

Perfection links & Drill collar lift adaptor

Rotary slips & Casing slips & Drill collar slips

Safety clamps

Manual tongs

Pneumatic slips

Tubing Spider

 

tubing spider, tubing spider model C, tubing spider model CHD, tubing spider model E

elevator links, TDS elevator links, weldless elevator links, elevator links for top drive, tubing elevator, TA tubing elevator, BDA tubing elevator, drill collar elevator, SLX drill collar elevator, rotary slips, DU rotary slips, SDS rotary slips, SDML rotary slips, SDXL rotary slips, slip type elevator, YC slip type elevator, YT slip type elevator, MGG drill pipe elevator, GG drill pipe elevator, safety clamps, safety clamps model T, safety clamps model C, safety clamps model MP-R, safety clamps model MP-M, safety clamps model MP-L, safety clamps model WA-C, safety clamps model WA-T

 

DD Tubing Elevator

DD tubing elevators are conventional center latch elevators for handling tubing in oil and gas drilling operation, DD tubing elevators are cast from high quality alloy steel, heat-treated, and NDT tested. the rated load is 125t(1125kN), and cover pipe sizes from 2⅜" to 4½" OD, IU or EU. link ears conform to API elevator links, DD tubing elevators bear API monogram as per API requirements, and marked with size of tubing and rated working capacity. tubing elevator, DD tubing elevator, RA tubing elevator, TE tubing elevator

Elevator Model

Type of tubing

(in)

 Elevator top bore

(mm)

Elevator bottom bore

(mm)

Rated Load

t (kN)

DD 2⅜/(load)

2⅜

62.31

62.31

125(1125)

DD 2⅜EU/(   )

2⅜EU

68.66

68.66

DD 2⅞/(        )

2⅞

75.01

75.01

DD 2⅞EU/(   )

2⅞EU

81.36

81.36

DD 3½/(         )

90.88

90.88

DD 3½EU/(    )

3½EU

98.02

98.02

DD 4/(            )

4

103.58

103.58

DD 4EU/(       )

4EU

110.72

110.72

DD 4½/(         )

116.66

116.66

DD 4½EU/(    )

4½EU

123.42

123.42

TA Tubing Elevators

TA double latch tubing elevators are conventional center latch elevators for handling tubing in oil and gas drilling operation, TA tubing elevators are cast from high quality alloy steel, heat-treated, and NDT tested.  the rated loads rang from 65t(585kN) to 150t(1350kN), and cover pipe sizes from 2⅜" to 4½" OD, IU or EU. link ears conform to API elevator links, TA tubing elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity.

tubing elevator, TA tubing elevator

Elevator Model

Type of tubing

(in)

 Elevator top bore

(mm)

Elevator bottom bore

(mm)

Rated Load

t (kN)

DD 2⅜/(load)

2⅜

62.31

62.31

65 (585)

100 (900)

125(1125)

150(1350)

DD 2⅜EU/(   )

2⅜EU

68.66

68.66

DD 2⅞/(        )

2⅞

75.01

75.01

DD 2⅞EU/(   )

2⅞EU

81.36

81.36

DD 3˝/(        )

90.88

90.88

DD 3½EU/(   )

3½EU

98.02

98.02

DD 4/(           )

4

103.58

103.58

DD 4EU/(      )

4EU

110.72

110.72

DD 4½/(        )

116.66

116.66

DD 4˝EU/(  )

4½EU

123.42

123.42

BDA Tubing Elevators

BDA double latch tubing elevators are conventional center latch elevators for handling tubing in oil and gas drilling operation, DD tubing elevators are cast from high quality alloy steel, heat-treated, and NDT tested.  the rated loads rang from 65t(585kN) to 100t(900kN), and cover pipe sizes from 2⅜" to 3½" OD, IU or EU. link ears conform to API elevator links, BDA tubing elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity.

tubing elevator, BDA tubing elevator

Elevator Model

Type of tubing

(in)

 Elevator top bore

(mm)

Elevator bottom bore

(mm)

Rated Load

t (kN)

DD 2⅜/(load)

2⅜

62.31

62.31

65 (585)

100 (900)

DD 2⅜EU/(    )

2⅜EU

68.66

68.66

DD 2⅞/(         )

2⅞

75.01

75.01

DD 2⅞EU/(    )

2⅞EU

81.36

81.36

DD 3½/(          )

90.88

90.88

DD 3½EU/(    )

3½EU

98.02

98.02

BD Tubing Elevators

BD close-lock ring tubing elevators, featured with one or two latches, are conventional tools for handling tubing in oil and gas drilling operation, BD tubing elevators are forged from high quality alloy steel, heat-treated, and NDT tested. the rated load are 40t(360kN) to 75t(675kN), and cover pipe sizes from 1.9" to 4½" OD, IU or EU. BD tubing elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity.

Элеватор ЭХЛ, tubing elevator, BD tubing elevator, Элеваторы двухштропные ВМ ЭХЛ, Элеватор двухштропный Халатяна для НКТ ЭХЛ, Элеватор трубный ЭТ

Elevator Model

Type of tubing

(in)

 Elevator top bore

(mm)

Elevator bottom bore

(mm)

Rated Load

t (kN)

BD 1.9EU/(load)

1.9EU

55.95

50

40(360)

65(585)

75(675)

BD 2⅜EU/(        )

2⅜EU

68.66

63

BD 2⅞EU/(        )

2⅞EU

81.36

75

BD 3½EU/(        )

3½EU

98.02

91

BD 4EU/(           )

4EU

110.72

104

BD 4½EU/(        )

4½EU

123.42

117

CD Tubing Elevators

CD tubing elevators are conventional side door casing elevators for handling tubing in oil and gas drilling operation, CD tubing elevators are forged from high quality alloy steel, heat-treated, and NDT tested. the rated loads rang from 40t(360kN) to 125t(1125kN), and cover tubing sizes from 1.9" to 4˝" OD. link ears conform to API elevator links, CD tubing elevators bear API monogram as per API requirements, and marked with size of casing and rated working capacity.

CD tubing elevator, Элеватор трубный ЭТ, Элеватор корпусной типа КМ

Tubing size

Tubing O.D.

(mm)

Non-upset tubing

External-upset tubing

Rating load

(kN)

Elevator Bore (mm)

Elevator top bore

Elevator bottom bore

1.9

48.26

50.39 (50)

55.96 (56)

50

360

585

675

900

1125

1350

2⅜

60.33

62.31 (63)

68.66 (69)

62

2⅞

73.03

75.05 (75)

81.36 (82)

75

88.90

90.88 (91)

98.02 (98)

91

4

101.60

103.58 (104)

110.72 (111)

104

114.30

116.66 (117)

123.42 (123)

117

 

check valve, flapper check valve, clapper check valve, in-line check valve, dart check valve, top entry check valve

 

Circulating hose loops

Swivel joints

Pup joints

Pipe fitting

Hammer union

Plug valve

Check valve

Emergency relief valve

Choke tee

Slab gate valve

 

 

 

 

 

 

    

hose loops, circulating hose loops with threaded construction, circulating hose loops with integral construction, threaded hose loops, integral hose loops, cementing and circulating hose loops, LROP hose loops, LRHU hose loops

hose loops, LROP hose loops, model LRHU hose loops, chicksan hose loops, steel hose loops, FMC hose loops, SPM hose loops, Weir hose loops, swivel joints, chicksan swivel joints, tsi swivel joints, ball swivel joints, plug valve, dr plug valve, ult plug vavlve, compact plug valve, forged plug valve, plug valve for high pressure flow control

The information of our products listed in this website is provided in line with API Specifications and China's National Standards, description for any product can help readers make their own decisions.

For any comments, please contact us at yrs71@163.com

Copyright (C) 2008 Taixing Petroleum Machinery Co., Ltd.  All rights reserved (Register No. SU ICP 08100726)

avigation-->