drill pipe elevator, RG drill pipe elevator, GG drill pipe elevator, MGG drill pipe elevator, RA drill pipe elevator, DD drill pipe elevator, CD drill pipe elevator, CDZ drill pipe elevator, LLD drill pipe elevator, side door drill pipe elevator, center latch drill pipe elevator, CL drill pipe elevator, CLS drill pipe elevator, TE drill pipe elevator, Элеватор трубный, Элеватор трубный , двухштропный/Элеватор КМ НП18, Элеваторы для труб

casing elevator, center latch casing elevator, SLX casing elevator, CD casing elevator, DD casing elevator, TA casing elevator, TMA casing elevator, RGA casing elevator, GGA casing elevator, GA casing elevator, SD casing elevator, collar type casing elevator, Элеватор корпусной типа КМ, Элеватор корпусной, Элеватор литой для обсадных труб ЭК

drill collar elevator, TA drill collar elevator, CD drill collar elevator, SLX drill collar elevator, Элеватор литой для обсадных труб ЭК

slip type elevators, MYT slip type elevator, YT slip type elevator, HYT slip type elevator, YC slip type elevator, MYC slip type elevator, HYC slip type elevator, HYC AO slip type elevator, XYC slip type elevator, Элеватор НКТ с вкладышами, Элеватор типа ЭТАД

Plug Valve, DR plug valve, ULT plug valve, TE plug valve, compact plug valve, LTPL plug valve, LT plug valve, top entry plug valve, bottom entry plug valve, Кран пробковый, Кран пробковый проходной сальниковый с паровым обогревом, Кран пробковый 3КМ

rotary slips, SDS rotary slips, SDML rotary slips, SDXL rotary slips, safety clamps, safety clamps model T, safety clamps model C, safety clamps model MP, WA safety clamps, safety clamps for drill collar, машинный ключ, Ключ УМК, Спайдер СПГ, Предохранительный хомут, предохранительные хомуты

tubing elevator, TA tubing elevator, BDA tubing elevator, CD tubing elevator, DD tubing elevator, RA tubing elevator, BD tubing elevator, Элеваторы двухштропные ВМ ЭХЛ (BD型), Элеватор двухштропный Халатяна для НКТ ЭХЛ, Элеватор трубный ЭТ

elevator links, TDS elevator links, weldless links, weldless elevator links, forged elevator links for top drive system, TDS weldless links, perfection links, SH perfection links, Drill collar lift adaptor, DC lift adaptor, DC lift dolly, Штропы для лодвески элеваторов, Штроп бурильный, Элеватор при помощи штропов

swivel joints, TSI swivel joints, long radius swivel joints, long sweep swivel joints, triplestep swivel joints, short radius swivel joints, short sweep swivel joints, pup joints, NPS pup joints, integral pup joints, integral pup joints with retention shoulder, seamless pup joints,Колено шарнирное 3КШ, Быстросборное Соединение (с барашковой гайкой) БСС, БРС, Быстроразъемное Соединение БРС-2, Соединение Быстросборное сб, Трубы Высокого Давления Твд

 

Send us emailTaixing Petroleum Machinery Co., Ltd.

中文

Reliable supplier for drill pipe elevator, casing elevator, drill collar elevator, tubing elevator, single joint elevator, slip type elevator, rotary slips, casing slips, drill collar slips, safety clamps, elevator links, perfection links, DC lift adaptor, manual tong, tubing spider, hose loops, put joint, swivel joints, plug valve and check valve, all major product lines that meet API Specifications and China domestic standards

   

 About Us

 API Certificates   

     Quality Control

 Chinese

 

single joint elevator, DDF single joint elevator, SJL single joint elevator, SPL single joint elevator

manual tong, manual tongs model B, manual tongs model DB, manual tongs model SDD, manual tongs model C, manual tongs model LF, manual tongs for workover operation, manual tongs model HT, машинный ключ, Ключ УМК

 

Drill pipe elevator 

Casing elevator

Drill collar elevator

Slip type elevator

Tubing elevator

Sucker rod elevator

Single joint elevator

Elevator links

Perfection links & Drill collar lift adaptor

Rotary slips & Casing slips & Drill collar slips

Safety clamps

Manual tongs

Pneumatic slips

Tubing Spider

 

tubing spider, tubing spider model C, tubing spider model CHD, tubing spider model E

elevator links, TDS elevator links, weldless elevator links, elevator links for top drive, tubing elevator, TA tubing elevator, BDA tubing elevator, drill collar elevator, SLX drill collar elevator, rotary slips, DU rotary slips, SDS rotary slips, SDML rotary slips, SDXL rotary slips, slip type elevator, YC slip type elevator, YT slip type elevator, MGG drill pipe elevator, GG drill pipe elevator, safety clamps, safety clamps model T, safety clamps model C, safety clamps model MP-R, safety clamps model MP-M, safety clamps model MP-L, safety clamps model WA-C, safety clamps model WA-T

 

DD Drill Pipe Elevators 

DD elevators are conventional collar type center latch elevators for handling 90 degree shoulder drill pipe in oil and gas drilling operation, DD drill pipe elevators are cast from high quality alloy steel, heat-treated, and NDT tested. the rated loads rang from 100t(900kN) to 350t(3150kN), and cover pipe sizes from 2⅞" to 5˝; OD, IU, EU, or IEU. link ears conform to API elevator links, DD drill pipe elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity.

drill pipe elevator,DD drill pipe elevator, RA drill pipe elevator, TE drill pipe elevator, Элеватор трубный, Элеватор трубный ,Элеваторы для труб

Elevator Model

Drill pipe model

(in)

 Elevator top bore

(mm)

 Elevator bottom bore

(mm)

Rated Load

t (kN)

DD 2⅞EU/(    )

2⅞EU

85.73

76

100 (900)

150(1350)

250(2250)

350(3150)

DD 3˝EU/(    )

3˝EU

103.19

92

DD 4IU/(         )

4IU

109.54

105

DD 4˝IEU/(   )

4˝IEU

122.24

118

DD 4˝EU/(    )

4˝EU

134.94

118

DD 5IEU/(      )

5IEU

134.94

131

DD 5˝IEU/(   )

5˝IEU

149.23

144

DDZ Drill Pipe Elevators

DDZ drill pipe elevators, just as RGG, MGG, GG, HGG drill pipe elevators, are conventional center latch elevators for handling taper shoulder drill pipes in oil and gas drilling operation, DDZ drill pipe elevators are cast from high quality alloy steel, heat-treated, and NDT tested. the rated loads rang from 150t(1350kN) to 500t(4500kN), and cover pipe sizes from 2⅜" to 5˝; OD, IU, EU, or IEU. link ears conform to API elevator links, DDZ drill pipe elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity.

drill pipe elevator, DDZ drill pipe elevator, MGG drill pipe elevator, Элеватор трубный, Элеватор трубный , двухштропный/Элеватор КМ НП18, Элеваторы для труб

Elevator Model

Elevator Bore Diameter

(mm)

Applicable for drill pipes

Rating load

Ton(kN)

Spec

(in)

Nominal Size

(mm)

Bottleneck size

(mm)

DDZ 67

67.47

2⅜EU

60.33

65.09

65 (585)

100(900)

150(1350)

250(2250)

350(3150)

500(4500)

DDZ 83

83.34

2⅞EU

73.03

80.96

DDZ 101

100.81

3˝EU

88.90

98.43

DDZ 109

108.74

4IU

101.60

106.36

DDZ 121

121.44

4EU

101.60

114.30

4˝IU

114.30

119.06

DDZ 133

133.35

4˝EU

114.30

127.00

5IEU

127.00

130.18

DDZ 148

147.64

5˝IEU

139.70

144.46

DDZ 179

178.59

6⅝ IEU

168.28

176.21

DDZ(T) Drill Pipe Elevators for Top Drive

DDZ (T) elevators, of which the dimension of the center of the two ears are 560mm and 600mm, are conventional center latch elevators for handling taper shoulder drill pipe with the Top Drive Systems in oil and gas drilling operation, DDZ(T) drill pipe elevators are cast from high quality alloy steel, heat-treated, and NDT tested. the rated loads rang from 250t (2250kN) to 500t(4500kN), and cover pipe sizes from 3˝; to 5˝; OD, IU, EU, or IEU. link ears conform to API elevator links, DDZ(T) drill pipe elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity.MG drill pipe elevator, Элеваторы для бурильных труб, Элеваторы для бурильных труб 

Elevator Model

Elevator Bore Diameter

(mm)

Applicable for drill pipes

Rating load

Ton(kN)

Spec

(in)

Nominal Size

(mm)

Bottleneck size

(mm)

DDZ(T)101

100.81

3˝EU

88.90

98.43

250(2250)

 

350(3150)

 

500(4500)

DDZ(T)109

108.74

4IU

101.60

106.36

DDZ(T)121

121.44

4EU

101.60

114.30

4˝IU

114.30

119.06

DDZ(T)133

133.35

4˝EU

114.30

127.00

5IEU

127.00

130.18

DDZ(T)148

147.64

5˝IEU

139.70

144.46

DDZ(T)179

178.59

6⅝IEU

168.28

176.21

CDZ Drill Pipe Elevators

CDZ drill pipe elevators are conventional side door drill pipe elevators for handling taper shoulder drill pipe in oil and gas drilling operation, CDZ drill pipe elevators are forged from high quality alloy steel, heat-treated, and NDT tested. the rated loads rang from 150t(1350kN) to 500t(4500kN), and cover pipe sizes from 2⅜" to 6⅝" OD, IU, EU, or IEU. link ears conform to API elevator links, CDZ drill pipe elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity, CDZ drill pipe elevators are popular in China  drill pipe elevator, CDZ drill pipe elevator, Элеватор КМ 18°, Элеватор трубный, Элеватор трубный , двухштропный/Элеватор КМ НП18, Элеваторы для труб, , Элеваторы для бурильных труб

Elevator Model

Drill pipe model

(in)

Bore Dia.

(mm)

Rated Load

t (kN)

CDZ 2⅜EU/(load)

2⅜EU

67.47

100 (900)

150(1350)

200(1800)

250(2250)

350(3150)

500(4500)

CDZ 2⅞EU/(       )

2⅞EU

83.34

CDZ 3˝EU/(       )

3˝EU

100.81

CDZ 4˝IEU/(      )

4˝IEU

121.44

CDZ 5IEU/(         )

5IEU

133.35

CDZ 5˝IEU/(      )

5˝IEU

147.64

 

CD Drill Pipe Elevators

CD drill pipe elevators are conventional side door drill pipe elevators for handling 90 degree shoulder drill pipe in oil and gas drilling operation, CD drill pipe elevators are forged from high quality alloy steel, heat-treated, and NDT tested. the rated loads rang from 150t(1350kN) to 500t(4500kN), and cover pipe sizes from 2" to 5˝; OD, IU, EU, or IEU. link ears conform to API elevator links, CD drill pipe elevators bear API monogram as per API requirements, and marked with size of drill pipe and rated working capacity, CD drill pipe elevators are popular in China.drill pipe elevator, CD drill pipe elevator, KM drill pipe elevator, Элеватор под НКТ типа КМ, Элеватор литой для обсадных труб ЭК, , Элеваторы для бурильных труб

Elevator Model

Drill pipe model

(in)

Elevator top bore

(mm)

Elevator bottom bore

(mm)

Rated Load

t (kN)

CD 2⅞EU/(load)

2⅞EU

86

76

150(1350)

200(1800)

250(2250)

350(3150)

500(4500)

CD 3˝EU/(      )

3˝EU

103

92

CD 4IU/(          )

4IU

110

105

CD 4EU/(         )

4EU

118

105

CD 4˝IEU/(     )

4˝IEU

122

118

CD 4˝EU/(      )

4˝EU

131

118

CD 5IEU/(        )

5IEU

135

131

CD 5˝IEU/(     )

5˝IEU

149

144

 

check valve, flapper check valve, clapper check valve, in-line check valve, dart check valve, top entry check valve

 

Circulating hose loops

Swivel joints

Pup joints

Pipe fitting

Hammer union

Plug valve

Check valve

Emergency relief valve

Choke tee

Slab gate valve

 

 

 

 

 

 

    

hose loops, circulating hose loops with threaded construction, circulating hose loops with integral construction, threaded hose loops, integral hose loops, cementing and circulating hose loops, LROP hose loops, LRHU hose loops

hose loops, LROP hose loops, model LRHU hose loops, chicksan hose loops, steel hose loops, FMC hose loops, SPM hose loops, Weir hose loops, swivel joints, chicksan swivel joints, tsi swivel joints, ball swivel joints, plug valve, dr plug valve, ult plug vavlve, compact plug valve, forged plug valve, plug valve for high pressure flow control

The information of our products listed in this website is provided in line with API Specifications and China's National Standards, description for any product can help readers make their own decisions.

For any comments, please contact us at yrs71@163.com

Copyright (C) 2008 Taixing Petroleum Machinery Co., Ltd.  All rights reserved (Register No. SU ICP 08100726)

-msnavigation-->